- Ocz vertex 3 firmware update 2.50 install#
- Ocz vertex 3 firmware update 2.50 iso#
- Ocz vertex 3 firmware update 2.50 windows#
I enter the bios to ensure that the drive shows up as a 128GB Yatapdong (reguardless of actual capacity it will say 128GB). I take a small jumper from an old PATA CD/DVD drive's rear master/slave pins and put it on the SSD.
Ocz vertex 3 firmware update 2.50 install#
I use a Win7 or Vista 32 install disk on usb, add the update EXEs to the root and set the SATA ports to IDE. The Destructive 1.7 updaters are freely available. But A) all the user data on the drive is lost in the process and 2) all SMART data is essentially reset. I rescued a failed drive with them, and generally believe they're the best way to do things. It doesn't update the FW, it erases it all and starts over. The newer FWs are much better, and if you can swing it, the Dflash is the way to go. RyderOCZ's instructions are good but sometimes hard to follow and fragmented. I did two regular Vertex 1.7 flashes and two destructive flashes yesterday and I explicitly made sure no other drives were connected. You do not need another drive in the system (of any kind, except the optical/usb drive ) to do a regular flash.
Ocz vertex 3 firmware update 2.50 windows#
The destructive flashes can be run through Windows in a manner, but the regular flashes must be run from the FreeDos updater. To reiterate, you can use a SATA optical drive in IDE. Some motherboards have some ports (lets say 0-4) that can be set to AHCI/IDE/RAID while the others (5-6) can be set to AHCI/IDE/RAID. But if you have a j.micron controlled set of ports, don't use those.Īs long as you can detect the drive in the BIOS you should be able to flash it. I have a separate SSDCHECK disk, but as I acquire older drives I run SSDCHECK to figure out which NAND they have and which updater to use.Īs long as you're on a normal port and IDE mode you should be able to update.
You know, you can run the board in IDE mode and still use your SATA DVD/CD drive. You'll lose all the data on the drive obviously, and you have to use a jumper, AND you have to run it from Windows/off a Windows install USB drive, but it's well worth it.īut I've just updated a couple Vertex and Agilities with regular 1.7 updaters. I would recommend the destructive updater for 1.7 if you can use it. Has anyone had any experience with this and how did you get the drive updated? I can run the ssdchk.exe file and it builds the updater.bat file with the correct firmware, but once I run updater.bat, I get a message saying 'Not found drive'.
Ocz vertex 3 firmware update 2.50 iso#
I couldn't boot the Linux based ISO due to having a SATA CD drive, so I built a bootable USB flash drive, copied the firmware files over as described here. Now I've moved on to an AMD based Crosshair V. Originally this was in a machine with an Nvidia based MB, the updater would never find the drive and from all I've read over the last year, the only solution was to put the drive on a different MB in order to update it (didn't have another machine to install it in, so I lived with the 1.4FW.
It's on the 1.4 firmware and I wanted to update it to 1.5->1.6->1.7 for the benefits of the update (mainly the 1.5 update as it adds 'garbage collection).
I have an OCZ Vertex 60GB SSD in my machine. Posting this as a last ditch effort for help.
0 kommentar(er)
